Gas Plumbing
The gas starts here in the propane tank. I got the
high pressure regulator from MoreBeer.com.
Here is a close up of the gas plumbing. You can see the high pressure propane
.hose going to the bushing which is attached to the main valve. This
is under the rightmost burner. I use the right burner for my HLT.
Here's the center burner plumbing. I use the center burner for my mash tun.
Here is the left burner plumbing. I use the left burner for my Boil kettle.
In this view, you can see one of the two unions. These are necessary so that
you can tighten the pipes into the T's without unscrewing the opposite end.